TESA 522 Series
Description:
These premium mounting tapes are designed for use when mounting plates on sleeves and are available in various foam densities for specific types of printing. The unique
These premium mounting tapes are designed for use when mounting plates on sleeves and are available in various foam densities for specific types of printing. The unique closed-cell polyethylene foams are ideal for combination printing and process/fine screen printing. For easy identification, each product has a color-coded logo printed on the tape. 522 Series tapes are only available in.020″
Description
| 20 MIL TAPES | |
| 52220 20 mil (blue logo) Ideal for combination printing when good solids and reverses are required. The adhesive is specifically formulated for use with sleeves. |
52221 20 mil (purple logo) For combination printing when solids/reverses and process/fine screen are equally important. The adhesive is specifically formulated for use with sleeves. |
| 52222 20 mil (red logo) The choice for combination printing when the quality of process and fine screens is critical. The adhesive is specifically formulated for use with sleeves. |
52223 20 mil (yellow logo) Low density foam carrier is very soft and is ideal for process and fine screen printing. The adhesive is specifically formulated for use with sleeves. |
Related products
-
Lohmann 2.0
-
3M 1900 Series
Request QuoteSOFT COMBINATION PRINTING TAPE WITH FOAM CARRIER The medium soft foam carrier improves tone reproduction where process and halftone images predominate.
SOFT COMBINATION PRINTING TAPE WITH FOAM CARRIER
The medium soft foam carrier improves tone reproduction where process and halftone images predominate.
-
PTFE Band Sealer
Request QuotePTFE BAND SEALER BELTS are ideally suited where thermal transfer through the surface of the belt is required in order to seal plastic bags.
Applications:
High volume bag manufacturing systems often use these types of belts running as a pair creating a clamping effect on the bag. These belts can also be found on air fill or air cushioning packaging machines as a means of allowing continues heat sealing to take place without molten plastic sticking to the belt.
Sealer belts tend to be two belts that run in tandem on the conveyor with a hot-plate that sits in contact with the inside of the belts as they run. The heat transfers through the belts surface sealing the plastic bag as it conveys it through the machine.
Features / Benefits
Constructed with two layers of PTFE coated glass cloth laminated together they benefit from being free of any step at the joint area that could leave a mark off.
The premium grade PTFE used to manufacture the belts has a non stick, high temperature resistant surface that prevents any molten plastics from building up on the belts surface.
Material Properties
• Non stick PTFE Surface
• Temperature resistant up to 260°C
• Lightweight and energy efficiency for economical operationFor more information:
Our address: Canada Plastics & Belting Inc 100 Dynamic Drive Units 5-7 Scarborough ON M1V5C1
Tel: +1 416 291 3036
-
3M 1200 E/H Series
Request Quote2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce. This orange, double coated
2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce
This orange, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates. Provides high quality light combination print. The adhesives remove cleanly from the print plate and the print cylinder.