3M 1700 E/H Series
Description:
MEDIUM FIRM COMBINATION PRINTING TAPES WITH FOAM CARRIER Provides quality results when the plate contains slightly more solids in a combination of solid and halftone images.
MEDIUM FIRM COMBINATION PRINTING TAPES WITH FOAM CARRIER
Provides quality results when the plate contains slightly more solids in a combination of solid and halftone images.
Description
| 15 MIL TAPES | |
| 1715E 15 Mil x 25 yards Easy Mount Adhesive |
1715EH 15 Mil x 25 yards Easy Mount Adhesive and higher adhesion level on plate side |
| 1715M 15 Mil x 25 yards Reduced plate side adhesion |
|
| 20 MIL TAPES | |
| 1720E 20 mil x 25 yards Easy Mount Adhesive |
1720EH 20 mil x 25 yards Easy Mount Adhesive and higher adhesion level on plate side |
| 1720M 20 mil x 25 yards Reduced plate side adhesion |
|
Related products
-
TESA 52015
-
3M 1900 Series
Request QuoteSOFT COMBINATION PRINTING TAPE WITH FOAM CARRIER The medium soft foam carrier improves tone reproduction where process and halftone images predominate.
SOFT COMBINATION PRINTING TAPE WITH FOAM CARRIER
The medium soft foam carrier improves tone reproduction where process and halftone images predominate.
-
3M 1200 E/H Series
Request Quote2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce. This orange, double coated
2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce
This orange, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates. Provides high quality light combination print. The adhesives remove cleanly from the print plate and the print cylinder.
-
PTFE Band Sealer
Request QuotePTFE BAND SEALER BELTS are ideally suited where thermal transfer through the surface of the belt is required in order to seal plastic bags.
Applications:
High volume bag manufacturing systems often use these types of belts running as a pair creating a clamping effect on the bag. These belts can also be found on air fill or air cushioning packaging machines as a means of allowing continues heat sealing to take place without molten plastic sticking to the belt.
Sealer belts tend to be two belts that run in tandem on the conveyor with a hot-plate that sits in contact with the inside of the belts as they run. The heat transfers through the belts surface sealing the plastic bag as it conveys it through the machine.
Features / Benefits
Constructed with two layers of PTFE coated glass cloth laminated together they benefit from being free of any step at the joint area that could leave a mark off.
The premium grade PTFE used to manufacture the belts has a non stick, high temperature resistant surface that prevents any molten plastics from building up on the belts surface.
Material Properties
• Non stick PTFE Surface
• Temperature resistant up to 260°C
• Lightweight and energy efficiency for economical operationFor more information:
Our address: Canada Plastics & Belting Inc 100 Dynamic Drive Units 5-7 Scarborough ON M1V5C1
Tel: +1 416 291 3036