HDPE CUTTING BOARD
Description:
HDPE Cutting Boards
HDPE (high-density polyethylene) cutting board sheets are designed for consumer and industrial cutting board applications. You’ll find this cutting board in restaurant and banquet hall settings as well as food processing centers. Since a polyethylene cutting board is affordable and easy to personalize, you can order them for your home kitchen. As an FDA-approved option that is practical, safe and stylish, HDPE is the best material for cutting boards of all sizes.
HDPE Plastic Cutting Board Material Cut to Size
Our HDPE cutting boards have a natural white color with a textured surface on both sides that prevents your knife from slipping or becoming dull. These thick, industrial-grade cutting boards are easy to clean with hot water and soap. They are also dishwasher-safe for true no-hassle clean-up. Still not convinced HDPE is the right choice? Order a sample piece to try out.
Canada Plastics & Belting Inc. has textured cutting board plastic available in almost any length and width with a thickness of up to one inch. Use the Cut-to-Size Calculator to enter your information. For an additional fee, we can give your cutting board shaped corners, machined edges and other customization. Order online or stop by a retail store where we can have your plastic cutting boards ready in less than five minutes.
HDPE Custom Fabrication Cutting Boards for Commercial and Industrial Applications
Canada Plastics & Belting Inc. provides the highest-quality fabrication services for HDPE and the ability to cut to any size for a custom plastic cutting board. HDPE can be used in many applications, namely:
- Buffet lines, such as restaurant buffets and portable plastic cutting board stations for events
- Butcher blocks in commercial applications such as a local fish market or meat counter
- Consumer and commercial cutting boards for cutting food
- Food packaging and preparation
- Salad bars in restaurants or grocery stores
- Other commercial and industrial food processing applications
HDPE has a smooth, non-slip surface and is easy to clean. Wood and other cutting materials can become weakened by overuse or have splits that hold onto bacteria and can even mold. However, as a high-grade plastic cutting board, HDPE does not harbor bacteria and maintains its strength and shape over time. Our plastic cutting board material has a natural matte finish on both sides of the cutting sheet. We supply our HDPE plastic cutting sheets for any application that requires a high-quality long-lasting cutting surface.
What Cutting Boards Do Commercial Kitchens Use?
HDPE cutting board sheets are used in all great commercial kitchens. The natural white color of the polyethylene creates a sanitary look that is desirable and even required for commercial food processing operations. The non-porous surface does not absorb food odors and is easy to maintain and sanitize. Industrial and commercial cutting sheets must be easy to clean because they are designed for a high volume of use such as food preparation.
As is standard operation for cleanliness in a commercial kitchen, HDPE plastic cutting sheets must be rinsed and scrubbed with a wire brush to remove any remaining food or stains after use. Next, the plastic cutting board material should be rinsed with hot water, sanitized in a 10% bleach solution and then rinsed again in cold water. The white plastic cutting board is then ready to be put through the dishwasher cycle. It can be dried, but for the best results, remove the HDPE plastic cutting board from the dishwasher before the drying cycle and allow it to air dry. Alternatively, you can handwash your HDPE board with liquid dish soap and water following sanitization.
What Are the Benefits of HDPE Plastic Cutting Boards?
We provide custom HDPE board with either a smooth or textured surface. The textured HDPE is also known as a kitchen cutting board and provides superior grip. They are textured on both sides, easy to clean and dishwasher safe. This is the best plastic cutting board that is FDA-approved for food preparation; it’s ideal because it does not dull knives and does not harbor bacteria.
Think of your average wood cutting board with grooves along the edges. It is a hassle to hand-wash, and as result, people may eventually throw it into the dishwasher with many kinds of bacteria sunken into the wood. However, wood swells and cracks when subjected to hot water and high temperatures, leading to splinter, rot and deforming. There is no such worry with our HDPE plastic cutting sheets. Flexible plastic cutting boards are a breeze to clean and maintain, and they don’t warp, crack or lose texture. Our HDPE cutting boards can even be upgraded with advanced antimicrobial technology to protect the cutting board against stain and odor-causing microorganisms.
For more information:
Our address: Canada Plastics & Belting Inc 100 Dynamic Drive Units 5-7 Scarborough ON M1V5C1
Tel: +1 416 291 3036
Description
Related products
-
FRP WALL SHEETS
Request QuoteFIBERGLASS RE-INFORCED PLASTIC
Standard & Flat Sheet FRP Wall Panels
Made for Beauty, Made for Ease, Made for LifeFor years, flat sheet FRP Wall Panels have grown a reputation for affordability, durability, and ease of installation in applications ranging from restrooms and kitchens to commercial interiors. Today, fiberglass wall panels are so much more!
We offer more customization options than any other manufacturer of fiberglass panels. Our FRP wall panels offer architects, builders, and designers a wall covering that not only provides all the characteristics they need, but also is suitable for virtually any interior application.
When other FRP manufacturers can’t or won’t, ours will
When you are shopping for fibreglass reinforced plastic (FRP) wall panels, wainscoting or wall cladding, ease of installation and durability are a basic requirement. However, for many out there searching, finding the right colour, finish, thickness or fire rating is where the search can get tough.
Flat sheet FRP wall panels solve that problem with more stocked standard colours, finishes, and sheeting options than any other FRP manufacturer, and a world of possibilities with value-added services like custom cuts, imaging, sublimating, laminating and much more.
Sizing Information
Standard Thickness: : 2mm (.08”)
Custom Thickness: FRP wall panels as thin as .045” or as thick as .170″ (pebbled) are possible
Widths: 60″ (5’) and 48″ (4’) are standard.Length: Cuts come in 8′, 9′, 10′ and 12′ standard lengths, with lengths up to 165ft available on rolls or coils. We can also cut to the length you need.
Fire Ratings
General purpose; Class C (FS=120 SD=290)
Low Flame, Class A LF (FS=25 and SD=450)
Low Flame and Smoke; Class A LF&S (FS= 20 SD=100)Vinyl Molding Profiles
Matching vinyl moldings for our standard stocked colours are available including inside and outside corners, as well as end caps and dividers in 8’ and 10’ (12’= white or special order only) lengths to handle any Kal-Lite FRP wall panels.
Aluminum Molding Profiles
We also offer the standard molding profiles in Aluminum with an anodized gray finish.Alternative Molding (Larger) Profiles
We do offer larger inside & outside corner (1 ½” x 1 ½”) profiles as well, for some of our more popular colors.Reasons to Use FRP Paneling/FRP Wallboard
- Non-porous
- Resin rich
- Extremely resistant to moisture
- Scratch resistant
- Impact resistant
- Lightweight
- Flexible
- More economical than other construction materials
- Mold and rust-resistant
- Aesthetically pleasing and available in a variety of colours and textures
- “Class A” Fire-rated FRP Panels available for medical and educational facilities
- Easy to install
- Resistant to odors
- Corrosion resistant
- Meets or exceeds USDA standards
Tips for Installing FRP Panels
The FRP panels must be stored at a temperature above 50 degrees for 24 hours before installation as they can contract and expand, causing them to bubble or buckle in areas after installation. Storing the FRP panels inside the area where they are to be installed is preferable. Always store on a flat surface. Installing FRP on flat, prepared, un-sanded walls will help prevent bubbles. Water-based adhesive should be applied with a trowel to the back of the wallboard after the divider piece is adhered using silicone. We suggest using Franklin Titebond water-based adhesive in standard applications using drywall, dura rock, or plywood as a substrate. Concrete block walls may require advanced polymer adhesive. It is imperative to measure and cut/route out for any plumbing fixtures or electrical boxes. When cutting Fiberglass Reinforced Plastic, the installer should subtract ½” from the vertical measurement and 1/8” for expansion around pipes and other projections. J-mould may be required at the base depending on the application, and it may also be used at the ceiling if installation takes place after the ceiling is installed. Make sure to clean all excess adhesive and silicone from the panels immediately.
Tools needed for Installing FRP Sheets
- Eye protection
- Filter masks should be worn while cutting FRP panels
- Shears
- Drill
- Trowel
- Carpenter’s square
- Hammer
- Tape measure
- Level
- Mouldings
- Fasteners if using
Cleaning FRP panels
Use a mild soap or detergent. FRP board is very easy to clean. Power washers may be used for stubborn staining, but abrasive cleaners should not be used.
https://youtu.be/0OzofHT83fc
For more information:
Our address: Canada Plastics & Belting Inc 100 Dynamic Drive Units 5-7 Scarborough ON M1V5C1
Tel: +1 416 291 3036
-
White Acrylic Sheet
Request Quote- Outstanding resistance to long-term exposure to sunlight and weathering
- Thermoformable
- Lightweight and rigid
- Excellent optical properties
- More impact resistance than glass
- Low water absorption
- Good electrical resistivity
- Good UV resistance
- Easy to glue and machine
WHITE ACRYLIC SHEET AVAILABLE IN STOCK:
Product Code Thickness Size 402 3mm 4ft x8ft 402 4.5mm 4ft x8ft 402 6mm 4ft x8ft 402 10mm 4ft x8ft 402 12mm 4ft x8ft 422 3mm 4ft x8ft 422 4.5mm 4ft x8ft 422 6mm 4ft x8ft 422 10mm 4ft x8ft 422 12mm 4ft x8ft 425 3mm 4ft x8ft 425 4.5mm 4ft x8ft 425 6mm 4ft x8ft 425 10mm 4ft x8ft 425 12mm 4ft x8ft Dimension Information:
Please contact us if you have tighter dimension tolerance requirements than our standard tolerances listed below. Due to manufacturing and cutting tolerances, sheet length and width may vary by +/- 1/4″.Acrylic sheet thickness tolerances are +/- 10% and can vary throughout the sheet, but variations are typically less than 5%.
Photos are for general reference only and not 100% color accurate.
Acrylic cast white sheets come in three shades of white.
425 is translucent but can Pass More Light,
422 is translucent but can Transfer More Light.
402 is opaque bright white.
Acrylic cast white sheets are available in many thicknesses and sizes, and cut to size options are available.Cast acrylic sheets are moisture resistant and 17 times stronger than glass, despite being half the weight.
Cast acrylic has a higher molecular weight than extruded acrylic, so it is a better choice for applications that require shaping, machining and laser cutting. Common uses for white cast acrylic sheets include signage, POP displays, photo light tables, drawing tables, and furniture.
For more information:Our address: Canada Plastics & Belting, 100 Dynamic Drive Units 5-7 Scarborough ON M1V5C1
Tel: +1 416 291 3036
-
BLUE MIRRORED ACRYLIC SHEETS
Request QuoteACRYLIC SHEETS IN MIRROR
Acrylic Mirrored sheets is stocked in 2mm & 3mm thick sheets, size 4ft x 8ft
Acrylic mirror sheets are available in
Silver Mirror, Gold Mirror & Rose Gold MirrorAPPLICATIONS:
Our acrylic mirror sheets can be used in a wide variety of applications, such as ballet rooms, exterior mirror for outdoor applications, safety mirrors for children, salon mirrors, and other general wall mounted unbreakable mirror.
We cut to size all acrylic sheets we sell, which saves on shipping costs since it offers a more economical means of packaging.
To order please provide us details of the sizes and quantities you need
Thickness tolerances are +/- 10% on acrylic sheets and can vary throughout the sheet. Normally we see variations less than 5%. Sheets sizes can vary from the manufacturer and some are cut from larger sheets. Because of this, the sheet dimensions are nominal and might be +/- saw cut.
- Windshields
- Decorative Furniture
- Cabinets
- Signage
- Product containers (lotions, fragrance, etc)
- POP/retail/store fixtures
- See-through or surveillance mirrored acrylic panels
INDUSTRIES:
- Architecture
- Automotive and Transportation
- Interior design
- Surveillance
Cut-to-size products are CUSTOM and therefore NON-RETURNABLE.
Call 416-291-3036 if you have any questions before placing your order.
3mm = 1/8”
2mm = .08”4ft = 48”
8ft = 96”For more information:
Our address: Canada Plastics & Belting Inc 100 Dynamic Drive Units 5-7 Scarborough ON M1V5C1
Tel: +1 416 291 3036
-
ROSE GOLD MIRRORED ACRYLIC SHEETS
Request QuoteACRYLIC SHEETS IN MIRROR
Acrylic Mirrored sheets is stocked in 2mm & 3mm thick sheets, size 4ft x 8ft
Acrylic mirror sheets are available in
Silver Mirror, Gold Mirror & Rose Gold MirrorAPPLICATIONS:
Our acrylic mirror sheets can be used in a wide variety of applications, such as ballet rooms, exterior mirror for outdoor applications, safety mirrors for children, salon mirrors, and other general wall mounted unbreakable mirror.
We cut to size all acrylic sheets we sell, which saves on shipping costs since it offers a more economical means of packaging.
To order please provide us details of the sizes and quantities you need
Thickness tolerances are +/- 10% on acrylic sheets and can vary throughout the sheet. Normally we see variations less than 5%. Sheets sizes can vary from the manufacturer and some are cut from larger sheets. Because of this, the sheet dimensions are nominal and might be +/- saw cut.
- Windshields
- Decorative Furniture
- Cabinets
- Signage
- Product containers (lotions, fragrance, etc)
- POP/retail/store fixtures
- See-through or surveillance mirrored acrylic panels
INDUSTRIES:
- Architecture
- Automotive and Transportation
- Interior design
- Surveillance
Cut-to-size products are CUSTOM and therefore NON-RETURNABLE.
Call 416-291-3036 if you have any questions before placing your order.
3mm = 1/8”
2mm = .08”4ft = 48”
8ft = 96”For more information:
Our address: Canada Plastics & Belting Inc 100 Dynamic Drive Units 5-7 Scarborough ON M1V5C1
Tel: +1 416 291 3036