G1 8MM X 60MM X 65A Shore Red Watts
$150.00
Description:
Net Weight : 6 lbs
7000 Series is a good all round product, most suitable for Textile printing
- High all round performance at a competitive price.
- Ideal for use in a wide range of applications.
G3 = V-Shaped Profile
For More information please contact Our customer service (416) 291-3036
Related products
-
3M 1800 E/H Series
Request QuoteFIRM COMBINATION PRINTING TAPES WITH FOAM CARRIER Insures quality results when the plate contains mostly solids in a combination of solid and halftone images.
FIRM COMBINATION PRINTING TAPES WITH FOAM CARRIER
Insures quality results when the plate contains mostly solids in a combination of solid and halftone images.
E-AIR RELEASE STANDARD PLATE SIDE ADHESION
E/H- AIR RELEASE HIGH PLATE SIDE ADHESION
-
TESA 523 Series
Request QuoteThis series of plate mounting tapes has hard liners, typically for printing solids and reverses on Flexographic printing presses. Certain tapes are used on rotary letterpresses
This series of plate mounting tapes has hard liners, typically for printing solids and reverses on Flexographic printing presses. Certain tapes are used on rotary letterpresses for all types of printing.
-
PTFE Band Sealer
Request QuotePTFE BAND SEALER BELTS are ideally suited where thermal transfer through the surface of the belt is required in order to seal plastic bags.
Applications:
High volume bag manufacturing systems often use these types of belts running as a pair creating a clamping effect on the bag. These belts can also be found on air fill or air cushioning packaging machines as a means of allowing continues heat sealing to take place without molten plastic sticking to the belt.
Sealer belts tend to be two belts that run in tandem on the conveyor with a hot-plate that sits in contact with the inside of the belts as they run. The heat transfers through the belts surface sealing the plastic bag as it conveys it through the machine.
Features / Benefits
Constructed with two layers of PTFE coated glass cloth laminated together they benefit from being free of any step at the joint area that could leave a mark off.
The premium grade PTFE used to manufacture the belts has a non stick, high temperature resistant surface that prevents any molten plastics from building up on the belts surface.
Material Properties
• Non stick PTFE Surface
• Temperature resistant up to 260°C
• Lightweight and energy efficiency for economical operationFor more information:
Our address: Canada Plastics & Belting Inc 100 Dynamic Drive Units 5-7 Scarborough ON M1V5C1
Tel: +1 416 291 3036
-
3M 1200 E/H Series
Request Quote2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce. This orange, double coated
2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce
This orange, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates. Provides high quality light combination print. The adhesives remove cleanly from the print plate and the print cylinder.