Doctor Blade
Description:
We inventory doctor blades in 328′ coils (100 meters). We can supply full coils, partial coils of individually cut blades. Modern flexo presses are equipped with an
Net Weight : 3.5 lbs
We inventory doctor blades in 328′ coils (100 meters). We can supply full coils, partial coils or individually cut blades.
Modern flexo presses are equipped with an anilox roller/doctor blade combination as an inking system. While single reverse angle blade systems are used for most narrow web presses, midsize and wide web presses are normally equipped with enclosed doctor blade systems. On all configurations, the wiping doctor blade is always applied in a reverse angle between 30 and 40 degrees. Due to the abrasive surface of ceramic anilox rollers, minimal doctor blade pressure is always recommended. Equally important for good doctor blade life is the relationship between cell configurations (shape/count) and blade tip thickness. For most water-based and solvent-based inks, .006″ blade thickness is ideal. Heavier-bodied inks and coatings often require thicker blades.
Description
| Standard The award winning blade with a consistant tip thickness. The contact area remains unchanged throughout the entire life of the blade, therefore, no changes in tonal value or or gradation occur due to the wear. The special polished contact zones of these doctor blades guarantee a quick start-up without problems. |
Bevel This carbon or stainless rigid blade wipes sharply to reduce hazing. This configuration provides stability with minimum wear-in time. Available in standard bevel blades and in the Multiblade (with 2 degree bevel). |
|
| StableFlex The tip configuration of the StableFlex blade is designed to “ride†with press vibration, reducing or eliminating chatter marks. |
One Step Providing additional blade thickness for strength, the one-piece construction of this blade eliminates the need for a backup blade, allowing for straight mounting without deviation. |
|
| Longlife The coated tip significantly lengthens the life of the blade, providing clean doctoring, resisting corrosion and greatly eliminating drag-outs. Great choice for abrasive inks and coatings. |
Soft The durable nickel-based coated tip protects this blade against corrosion. Designed for use with high pH inks, this blade significantly reduces score lines in flexo applications. |
|
| Duralife Exclusively for flexo applications, this coated blade enhances blade and anilox roller life. Proven to last longer than other coated flexo blades, this blade is perfect for use with pearlescent and other abrasive inks. |
Flexolife The double-radius blade extends blade life while reducing anilox wear. These blades can be used with both solvent and water-based inks. |
|
| Plastic Doctor Blades Premium Polyester/MYLAR® doctor blade with standard bevel edge. This type of doctor blade is most commonly used as a contain |
Occasionally used as a conventional doctor blade, they do not meter ink as well as a steel doctor blade. (PDR)
Related products
-
TESA 520 Series
Request QuoteThese premium mounting tapes are available in various foam densities for specific types of printing. The unique closed-cell polyethylene foams are ideal for combination
These premium mounting tapes are available in various foam densities for specific types of printing. The unique closed-cell polyethylene foams are ideal for combination printing and process/fine screen printing. For easy identification, each product has a color-coded logo printed on the tape.
-
3M 1100 Series
Request QuoteThe low density foam carrier maximizes dot reproduction for high quality process, screen and vignette printing.
PROCESS PRINTING TAPES WITH FOAM CARRIER
The low density foam carrier maximizes dot reproduction for high quality process, screen and vignette printing.
-
3M 1200 E/H Series
Request Quote2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce. This orange, double coated
2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce
This orange, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates. Provides high quality light combination print. The adhesives remove cleanly from the print plate and the print cylinder.
-
3M 1500 E/H Series
Request Quote3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion are designed for mounting flexographic print plates to cylinders or sleeves.
MEDIUM SOFT COMBINATION PRINTING TAPE WITH FOAM CARRIER
3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion are designed for mounting flexographic print plates to cylinders or sleeves. This family of foam mounting tapes provides excellent print quality for process, combination, and solid printing.
Offers a complete range of foam densities providing excellent print quality from process to combination to solid printing.
Consistent caliper control allows the printer to use multiple foam densities on a print job to optimize print quality.