3M 1500 E/H Series
Description:
3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion are designed for mounting flexographic print plates to cylinders or sleeves.
MEDIUM SOFT COMBINATION PRINTING TAPE WITH FOAM CARRIER
3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion are designed for mounting flexographic print plates to cylinders or sleeves. This family of foam mounting tapes provides excellent print quality for process, combination, and solid printing.
Offers a complete range of foam densities providing excellent print quality from process to combination to solid printing.
Consistent caliper control allows the printer to use multiple foam densities on a print job to optimize print quality.
Description
Use the 3M proprietary Easy Mount liner, creating micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate.
The adhesive on the linered side (plate side) of the tape is designed for mounting of photopolymer plates, excellent holding power on-press with high plateside adhesion and clean plate removal when demounting.
The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.
| 15 MIL TAPES | |
| 1515E 15 Mil x 25 yards Easy Mount Adhesive |
1515EH 15 Mil x 25 yards Easy Mount Adhesive and higher adhesion level on plate side |
| 20 MIL TAPES | |
| 1520E 20 Mil x 25 yards Easy Mount Adhesive |
1520EH 20 Mil x 25 yards Easy Mount Adhesive and higher adhesion level on plate side |
For More information please call customer service @ (416)-291-3036
Related products
-
Lohmann 2.0
-
TESA 52330
-
3M 1200 E/H Series
Request Quote2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce. This orange, double coated
2 Series is specifically designed for process printing at high speeds. The foam density results in very low dot gain while reducing plate bounce
This orange, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates. Provides high quality light combination print. The adhesives remove cleanly from the print plate and the print cylinder.
-
TESA 52015