3M 1300 E/H Series
Description:
3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion are designed for mounting flexographic print plates to cylinders or sleeves.
MEDIUM SOFT COMBINATION PRINTING TAPE WITH FOAM CARRIER
3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion are designed for mounting flexographic print plates to cylinders or sleeves. This family of foam mounting tapes provides excellent print quality for the process, combination, and solid printing.
Offers a complete range of foam densities providing excellent print quality from process to combination to solid printing.
Consistent caliper control allows the printer to use multiple foam densities on a print job to optimize print quality.
Description
Use the 3M proprietary Easy Mount liner, creating micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate.
The adhesive on the linered side (plate side) of the tape is designed for mounting of photopolymer plates, excellent holding power on-press with high plateside adhesion and clean plate removal when demounting.
The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.
| 15 MIL TAPES | |
| 1315E 15 Mil x 25 yards Easy Mount Adhesive |
1315EH 15 Mil x 25 yards Easy Mount Adhesive and higher adhesion level on plate side |
| 20 MIL TAPES | |
| 1320E 20 Mil x 25 yards Easy Mount Adhesive |
1320EH 20 Mil x 25 yards Easy Mount Adhesive and higher adhesion level on plate side |
For More information please call customer service @ (416)-291-3036
Related products
-
3M 400 Series/Solid
Request QuoteThe maximum density of the vinyl carrier produces uniform coverage when halftone dot reproduction is not critical. Also, pinholing is minimized. 4 Series is ideal
SOLID PRINTING WITH HARD VINYL COVER
The maximum density of the vinyl carrier produces uniform coverage when halftone dot reproduction is not critical. Also, pinholing is minimized. 4 Series is ideal for solids and bold reverses.
-
3M 1000 Series
Request Quote1000 Series is one of the most widely used tapes. It is in the middle of the density range and produces high quality results when solid and halftone areas are equally important.
MEDIUM COMBINATION PRINTING TAPE WITH FOAM CARRIER
1000 Series is one of the most widely used tapes. It is in the middle of the density range and produces high quality results when solid and halftone areas are equally important.
-
Doctor Blade
Request QuoteWe inventory doctor blades in 328′ coils (100 meters). We can supply full coils, partial coils of individually cut blades. Modern flexo presses are equipped with an
Net Weight : 3.5 lbs
We inventory doctor blades in 328′ coils (100 meters). We can supply full coils, partial coils or individually cut blades.
Modern flexo presses are equipped with an anilox roller/doctor blade combination as an inking system. While single reverse angle blade systems are used for most narrow web presses, midsize and wide web presses are normally equipped with enclosed doctor blade systems. On all configurations, the wiping doctor blade is always applied in a reverse angle between 30 and 40 degrees. Due to the abrasive surface of ceramic anilox rollers, minimal doctor blade pressure is always recommended. Equally important for good doctor blade life is the relationship between cell configurations (shape/count) and blade tip thickness. For most water-based and solvent-based inks, .006″ blade thickness is ideal. Heavier-bodied inks and coatings often require thicker blades.
-
3M 1500 E/H Series
Request Quote3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion are designed for mounting flexographic print plates to cylinders or sleeves.
MEDIUM SOFT COMBINATION PRINTING TAPE WITH FOAM CARRIER
3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion are designed for mounting flexographic print plates to cylinders or sleeves. This family of foam mounting tapes provides excellent print quality for process, combination, and solid printing.
Offers a complete range of foam densities providing excellent print quality from process to combination to solid printing.
Consistent caliper control allows the printer to use multiple foam densities on a print job to optimize print quality.