3M 1100 Series

3M
Product Code: 3M 1100 SERIES

3M 1100 Series

Description:

The low density foam carrier maximizes dot reproduction for high quality process, screen and vignette printing.

PROCESS PRINTING TAPES WITH FOAM CARRIER

The low density foam carrier maximizes dot reproduction for high quality process, screen and vignette printing.

Request a Quote

Description

  15 MIL TAPES
  1115 15 mil x 25 yards
Standard .015” product		   1115-15 15 mil x 25 yards
Both nominal and initial thickness is .015”
  1115E 15 mil x 25 yards
Easy Mount Adhesive		   1115EH 15 mil x 25 yards
Easy Mount Adhesive and higher adhesion level on plate side
  1115-15EH 15 mil x 25 yards
Easy Mount Adhesive and higher adhesion level on plate   side; both nominal and initial thickness is .015”
  20 MIL TAPES
  1120 20 mil x 25 yards
Standard .020” product		   1120-20 20 mil x 25 yards
Both nominal and initial thickness is .020”
  1120E 20 mil x 25 yards
Easy Mount Adhesive		   1120EH 20 mil x 25 yards
Easy Mount Adhesive and higher adhesion level on plate side
  1120-20EH 20 mil x 25 yards
Easy Mount Adhesive and higher adhesion level on plate side;Both nominal and initial thickness is .020”		   1120K 20 mil x 25 yards
Adhesive formulated for mounting photopolymer plates to   fiberglass or composite sleeves only

Related products

  • Tesa

    TESA 520 Series

    TESA 520 Series

    These premium mounting tapes are available in various foam densities for specific types of printing. The unique closed-cell polyethylene foams are ideal for combination

    These premium mounting tapes are available in various foam densities for specific types of printing. The unique closed-cell polyethylene foams are ideal for combination printing and process/fine screen printing. For easy identification, each product has a color-coded logo printed on the tape.

    Request Quote
  • PTFE® Band Sealers

    PTFE Band Sealer

    PTFE Band Sealer

    PTFE BAND SEALER BELTS are ideally suited where thermal transfer through the surface of the belt is required in order to seal plastic bags.

    Applications:

    High volume bag manufacturing systems often use these types of belts running as a pair creating a clamping effect on the bag. These belts can also be found on air fill or air cushioning packaging machines as a means of allowing continues heat sealing to take place without molten plastic sticking to the belt.

    Sealer belts tend to be two belts that run in tandem on the conveyor with a hot-plate that sits in contact with the inside of the belts as they run. The heat transfers through the belts surface sealing the plastic bag as it conveys it through the machine.

    Features / Benefits

    Constructed with two layers of PTFE coated glass cloth laminated together they benefit from being free of any step at the joint area that could leave a mark off.

    The premium grade PTFE used to manufacture the belts has a non stick, high temperature resistant surface that prevents any molten plastics from building up on the belts surface.

    Material Properties

    • Non stick PTFE Surface
    • Temperature resistant up to 260°C
    • Lightweight and energy efficiency for economical operation

    For more information:

    Our address: Canada Plastics & Belting Inc 100 Dynamic Drive Units 5-7 Scarborough ON M1V5C1

    Tel: +1 416 291 3036

    Request Quote
  • 3M

    3M 1800 E/H Series

    3M 1800 E/H Series

    FIRM COMBINATION PRINTING TAPES WITH FOAM CARRIER Insures quality results when the plate contains mostly solids in a combination of solid and halftone images.

    FIRM COMBINATION PRINTING TAPES WITH FOAM CARRIER

    Insures quality results when the plate contains mostly solids in a combination of solid and halftone images.

    E-AIR RELEASE STANDARD PLATE SIDE ADHESION

    E/H- AIR RELEASE HIGH PLATE SIDE ADHESION

    Request Quote
  • cat_lohmann

    Lohmann 2.0

    Lohmann 2.0
    Request Quote