Related products
-
3M 1100 Series
Request QuoteThe low density foam carrier maximizes dot reproduction for high quality process, screen and vignette printing.
PROCESS PRINTING TAPES WITH FOAM CARRIER
The low density foam carrier maximizes dot reproduction for high quality process, screen and vignette printing.
-
TESA 52017
-
Doctor Blade
Request QuoteWe inventory doctor blades in 328′ coils (100 meters). We can supply full coils, partial coils of individually cut blades. Modern flexo presses are equipped with an
Net Weight : 3.5 lbs
We inventory doctor blades in 328′ coils (100 meters). We can supply full coils, partial coils or individually cut blades.
Modern flexo presses are equipped with an anilox roller/doctor blade combination as an inking system. While single reverse angle blade systems are used for most narrow web presses, midsize and wide web presses are normally equipped with enclosed doctor blade systems. On all configurations, the wiping doctor blade is always applied in a reverse angle between 30 and 40 degrees. Due to the abrasive surface of ceramic anilox rollers, minimal doctor blade pressure is always recommended. Equally important for good doctor blade life is the relationship between cell configurations (shape/count) and blade tip thickness. For most water-based and solvent-based inks, .006″ blade thickness is ideal. Heavier-bodied inks and coatings often require thicker blades.
-
PTFE Band Sealer
Request QuotePTFE Band Sealer Belts
PTFE Band Sealer Belts are ideally suited where thermal transfer through the surface of the belt is required in order to seal plastic bags.
High volume bag manufacturing systems often use these types of belts running as a pair creating a clamping effect on the bag. These belts can also be found on air fill or air cushioning packaging machines as a means of allowing continuous heat sealing to take place without molten plastic sticking to the belt.
Sealer belts tend to be two belts that run in tandem on the conveyor with a hot-plate that sits in contact with the inside of the belts as they run. The heat transfers through the belts surface sealing the plastic bag as it conveys it through the machine.
FEATURES / BENEFITS
Constructed with two layers of PTFE coated glass cloth laminated together, they benefit from being free of any step at the joint area that could leave a mark off.
The premium grade PTFE used to manufacture the belts has a non-stick, high-temperature-resistant surface that prevents any molten plastics from building up on the belts surface.
MATERIAL PROPERTIES
- Non-stick PTFE Surface
- Temperature resistant up to 260°C
- Lightweight and energy efficiency for economical operation
For more information:
Our address: Canada Plastics & Belting Inc, 100 Dynamic Drive, Units 5-7, Scarborough, ON, M1V 5C1
Tel: +1 416 291 3036